Studio Projects LSD2

The LSD-2 is comprised of two separate dual-membrane solid state microphones contained within a single housing. Its capsules are mounted in close proximity on a vertical axis - the upper capsule assembly having the ability to rotate 270 degrees horizontally, relative to the lower capsule. Two C&K three-way switches control the polar response, high pass filtering and -10dB pad for each capsule (The switches on the front of the body correspond to the lower fixed capsule, while the switches 180° opposite on the back of the mic control the rotating upper capsule). It is the combination of capsule articulation and independent pattern switching which allows a user of the LSD2 to achieve all manner of coincident pair stereophonic recording techniques. Due to the close proximity of the capsules, there is no phase cancellation resulting from time delay between the two signals. This translates into excellent mono compatibility.

Applications:

• XY - Coincident Cardioids
• Mid-Side Method
• Stereosonic Technique (Blumlein)
• Overhead Main Mic
• Drums 
• Vocal, Voice-Over
  

LSD2 Specifications:

• Type: Stereo condenser microphone with vertically coincident 1.06” (27mm.) dual diaphragms
• Polar pattern: Cardioid, Omnidirectional
• Frequency response: 30~20000Hz
• Sensitivity: 12mV/Pa=-38dB(0dB=1V/Pa)
• Output impedance: <200 Ohm
• Load impedance: >1200 Ohm
• Maximum SPL: 139/146dB SPL (for 1% THD@1000Hz(0dB/-10dB pad, 0dB SPL=0.00002Pa)
• Noise: (Line)---28 dB (A weighted)---18 dB-A
• S/N: 76 dB
• Power requirement: 24v.-52.5v. phantom power
• Current consumption: 2.5mA
• Circuit: transformerless circuit, featuring extremely low self noise and large dynamic range
• Connector: Gold-plated 7-pin XLR
• Size: 2.1” (53.34mm.) dia
• Low Cut: 6dB/Octave at 150Hz
• Pad: -10dB

Autres produits Studio Projects